SAMPLE eMotion Flex 1.75mm
50g sample of eMotion Flex 1.75mm (random colour)
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________
The eMotion Flex is a very flexible rubber replacing filament for 3D printing. The combination of flexibility, mechanical strength, durability and good resistance to chemicals and extreme temperatures makes it a unique filament. Finally eMotion Flex exhibits excellent UV resistance.
The eMotion Flex needs to be printed at high temperature (~250°C), and low speed (~20mm/s), heatbed at 90°C, reduce the retraction and the acceleration of the extruder.
Features:
• Very flexible
• Strong
• Long term heat resistant
• Good chemical resistance
• UV resistant
________________________
The eMotion Flex is a very flexible rubber replacing filament for 3D printing. The combination of flexibility, mechanical strength, durability and good resistance to chemicals and extreme temperatures makes it a unique filament. Finally eMotion Flex exhibits excellent UV resistance.
The eMotion Flex needs to be printed at high temperature (~250°C), and low speed (~20mm/s), heatbed at 90°C, reduce the retraction and the acceleration of the extruder.
Features:
• Very flexible
• Strong
• Long term heat resistant
• Good chemical resistance
• UV resistant
| Size | Ø | Tolerance Roundness |
|---|---|---|
| 1,75mm | ± 0,05mm | ≥ 95% |
| 2,85mm | ± 0,10mm | ≥ 95% |
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,14 g/cc |
| Melt volume flow rate | ISO 1133 | 39 cm³/10 min |
| Stress at break | ISO 527 | 24 |
| Strain at break | ISO 527 | 530,00% |
| Tensile modulus | ISO 527 | 95 MPa |
| Impact strength Charpy method 23˚C |
ISO 179 | Notched No break |
| Shore D Hardness | ISO 868 | 45 |
| Description | Testmethod | Typical value |
|---|---|---|
| Printing temperature | - | 220-260˚C |
| Melting temperature | ISO 11357 | 180˚C |
