G-fil 1.75mm Nature translucent 2,3kg
2,3kg of G-fil 1.75mm Nature translucent (RAL 9017)
Spool diameter non standard (30cm), please be carefull if your spool holder is adapted.
Indicated wieght: actual amount of printable material.
Spool diameter non standard (30cm), please be carefull if your spool holder is adapted.
Indicated wieght: actual amount of printable material.
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________
G-fil is a strong, high clarity, odor neutral and easy to print filament for 3D printing. These characteristics, together with the high impact strength, excellent flexibility and practically no shrinkage make G-fil an excellent material which combines the advantages of both PLA and ABS. The filament is hydrophobic and therefore does not absorb water. Briefly, G-fil has many great features and is the perfect addition to any filament assortment.
Features :
________________________
G-fil is a strong, high clarity, odor neutral and easy to print filament for 3D printing. These characteristics, together with the high impact strength, excellent flexibility and practically no shrinkage make G-fil an excellent material which combines the advantages of both PLA and ABS. The filament is hydrophobic and therefore does not absorb water. Briefly, G-fil has many great features and is the perfect addition to any filament assortment.
Features :
- Strong & Flexible
- Almost no “warping”
- Hydrophobic (Does not absorb water)
- Food Contact Acceptable
- Odor neutral printing
Dimensions
|
Size |
Ø |
Roundness |
|
1,75mm |
± 0,05mm |
≥ 95% |
|
2,85mm |
± 0,10mm |
≥ 95% |
Physical properties
|
Description |
Testmethod |
Typical value |
|
Specific gravity |
ASTM D792 |
1,27g/cc |
|
Mold shrinkage |
ASTM D955 |
0,2-0,5% |
|
Tensile strength at yeld |
ASTM D638 |
50 MPa |
|
Elongation at break |
ASTM D638 |
120% |
|
Flexular modulus |
ASTM D790 |
2150MPa |
|
Impact strength Izod method 23°C |
ASTM D256 |
85j /m |
|
Rockwell hardness |
ASTM D785 |
105 |
|
Moisture absorbtion |
ASTM D570 |
0,13% |
Thermal properties
|
Description |
Testmethod |
Typical value |
|
Printing temp. |
- |
235-255°C |
|
Heat distortion temp. |
ASTM D648 |
70°C |
|
Light transmittance (for the translucent ones) |
ASTM D1003 |
90% |
