Polypropylene filament 1.75mm 500g
500g of Polypropylene translucent filament 1.75mm
Indicated wieght: actual amount of printable material.
Indicated wieght: actual amount of printable material.
34,90 € VAT inc.
29,08 € VAT exc.
29,08 € VAT exc.
Polypropylene is an easy to print general purpose low-density filament, printable on a cold bed, covered with polypropylene (adhesive tape for example).
Polypropylene has been developed for optical clarity while maintaining mechanical performance and a superb layer adhesion.
Polypropylene's high stretch ability, decent flexibility and chemical/fatigue resistance makes it suitable for a variety of household articles and containers.
Polypropylene can also be used for engineering articles such as living-hinges and snap-fit fastener materials.
Lastly it can be used to print dishwasher & microwave safe objects.
Polypropylene is a cost-effective all round filament suitable for a broad variety of needs.
Features:
- High chemical & fatique resistance
- High elongation before break
- Superb layer adhesion
- Dishwasher & microwave safe
Dimensions:
Physical properties:
Thermal properties:
Polypropylene has been developed for optical clarity while maintaining mechanical performance and a superb layer adhesion.
Polypropylene's high stretch ability, decent flexibility and chemical/fatigue resistance makes it suitable for a variety of household articles and containers.
Polypropylene can also be used for engineering articles such as living-hinges and snap-fit fastener materials.
Lastly it can be used to print dishwasher & microwave safe objects.
Polypropylene is a cost-effective all round filament suitable for a broad variety of needs.
Features:
- High chemical & fatique resistance
- High elongation before break
- Superb layer adhesion
- Dishwasher & microwave safe
Dimensions:
| Size | ø tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
Physical properties:
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ASTM D1505 | 0,9 g/cc |
| MFR 230°C / 2,16 kg | ISO 1133 | 8,0 g/10 min |
| Tensile strength | ASTM D638 | 12 Mpa |
| Strain at break | ASTM D638 | >600% |
| Flexural modulus | ASTM D790 | 402 MPa |
| Hardness | ASTM D2240 | 50D |
Thermal properties:
| Description | Testmethod | Typical value |
|---|---|---|
| printing temp. | - | 240±10˚C |
| melting temp. | - | 205±15˚C |
| vicat softening temp. | - | 103˚C |
