PC ABS 1.75mm Noir 500g
PC ABS 1.75mm Noir 500g
Indicated wieght: actual amount of printable material.
Indicated wieght: actual amount of printable material.
36,00 € VAT inc.
30,00 € VAT exc.
30,00 € VAT exc.
PC-ABS is an incredibly strong filament with an even higher impact resistance than our regular ABS. This is a consequence of the addition of the proper amount of polycarbonate in this modification, which also creates a nearly perfect interlayer adhesion and a beautiful surface gloss. The above features, combined with a highly stable printing process makes PC-ABS the perfect material for mechanical parts and tools, which should be light and strong and show minimal wear after prolonged use.
PC-ABS features:
- Improved interlayer adhesion
- High impact resistance
- High surface gloss
- Stable printing process
Dimensions
| Size | ø tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
Physical properties
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ASTM D792 | 1,05 g/cc |
| MFR 220˚C/5 kg | ISO 1183 | 0,47 gr/10 min |
| Tensile strength | ISO 527 | 37,2 Mpa |
| Strain at break | ISO 527 | 14% |
| Tensile modulus | ISO 527 | 1820 Mpa |
| Impact strength - Charpy 23˚C | ISO 179 | 25,5 kJ/m² |
Thermal properties
| Description | Testmethod | Typical value |
|---|---|---|
| printing temp. | eM-T | 270±10˚C |
| melting temp. | ISO 294 | 250±10˚C |
| Heat deflection temp. | ISO 306 | 108˚C |
Additional info:
Recommended temperature for heated bed is +100˚C. We recommend kapton and / or pva glue stick for adhesion.
PC-ABS can be used on all common desktop FDM or FFF technology 3D printers.
Storage:
Cool and dry (15-25˚C) and away from UV light. This enhances the shelf life significantly.
