PVA-S 1.75mm soluble filament
500g of soluble PVA-S filament 1.75mm
Indicated wieght: actual amount of printable material.
Indicated wieght: actual amount of printable material.
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________
PVA-S is our specially developed water soluble solution for dual extrusion when you need to print with styrene based materials. PVA-S has an excellent adherence to ABS, ABS-X, ASA-X, GLASSBEND and TPU98A. PVA-S dissolves slightly slower than regular PVA and it is advised to dissolve in luke-warm water, preferably in circulated water. PVA-S can handle higher nozzle temperatures (<250°C) without the risk of cross linking and clogging the nozzle and is therefore perfect for printing with styrene based materials which typically print at higher temperatures.
Dimensions
Thermal properties
Additional info:
Storage:
________________________
PVA-S is our specially developed water soluble solution for dual extrusion when you need to print with styrene based materials. PVA-S has an excellent adherence to ABS, ABS-X, ASA-X, GLASSBEND and TPU98A. PVA-S dissolves slightly slower than regular PVA and it is advised to dissolve in luke-warm water, preferably in circulated water. PVA-S can handle higher nozzle temperatures (<250°C) without the risk of cross linking and clogging the nozzle and is therefore perfect for printing with styrene based materials which typically print at higher temperatures.
PVA-S features:
- Great adhesion to styrene based materials
- Stable at higher nozzle temperatures (<250°C)
- Performs in heated environments up to 55-60 °C
- Good dissolvability in luke warm water
- Waste can be disposed with household effluent (*)
| Size | ø tolerance | Roundness |
|---|---|---|
| 1,75mm | ø 0,05mm | 95% |
| 2,85mm | ø 0,10mm | 95% |
Physical properties
| Description | Testmethod | Typical value |
|---|---|---|
| Specific gravity | ISO 1183 | 1,19 g/cc |
| MFR 190˚C / 21,6 kg | ISO 1133 | 58 g/10 min |
Thermal properties
| Description | Testmethod | Typical value |
|---|---|---|
| Printing temp. | eM-T | 245±10ºC |
Additional info:
Recommended temperature for heated bed is >60˚C. Do not exceed a printing temperature of 260˚C for a prolonged period. PVA-S works with most of the common adhesives.
The speed at which the product dissolves in water is dependent on the volume of the printed object, the amount and the temperature of the water. Higher water temperature (up to 70˚C is no problem) will accelerate the dissolution. Keep in account that the temperature of the water is based on the properties of the material that you are printing with PVA-S to avoid warping issues.
PVA-S can be used on most Dual printing desktop FDM or FFF technology 3D printers.
(*)This material is not fully biodegradable but can be disposed of through the household drain with an excess of water.
