G-fil 1.75mm Red opaque 2,3kg
2,3kg of G-fil 1.75mm Red opaque
Spool diameter non standard (30cm), please be carefull if your spool holder is adapted.
Spool diameter non standard (30cm), please be carefull if your spool holder is adapted.
Out of stock
Need some help to chose your filament? Take a look at this link "Everything about... THE FILAMENTS"
________________________
G-fil is a strong, high clarity, odor neutral and easy to print filament for 3D printing. These characteristics, together with the high impact strength, excellent flexibility and practically no shrinkage make G-fil an excellent material which combines the advantages of both PLA and ABS. The filament is hydrophobic and therefore does not absorb water. Briefly, G-fil has many great features and is the perfect addition to any filament assortment.
Features :
________________________
G-fil is a strong, high clarity, odor neutral and easy to print filament for 3D printing. These characteristics, together with the high impact strength, excellent flexibility and practically no shrinkage make G-fil an excellent material which combines the advantages of both PLA and ABS. The filament is hydrophobic and therefore does not absorb water. Briefly, G-fil has many great features and is the perfect addition to any filament assortment.
Features :
- Strong & Flexible
- Almost no “warping”
- Hydrophobic (Does not absorb water)
- Food Contact Acceptable
- Odor neutral printing
Dimensions
|
Size |
Ø |
Roundness |
|
1,75mm |
± 0,05mm |
≥ 95% |
|
2,85mm |
± 0,10mm |
≥ 95% |
Physical properties
|
Description |
Testmethod |
Typical value |
|
Specific gravity |
ASTM D792 |
1,27g/cc |
|
Mold shrinkage |
ASTM D955 |
0,2-0,5% |
|
Tensile strength at yeld |
ASTM D638 |
50 MPa |
|
Elongation at break |
ASTM D638 |
120% |
|
Flexular modulus |
ASTM D790 |
2150MPa |
|
Impact strength Izod method 23°C |
ASTM D256 |
85j /m |
|
Rockwell hardness |
ASTM D785 |
105 |
|
Moisture absorbtion |
ASTM D570 |
0,13% |
Thermal properties
|
Description |
Testmethod |
Typical value |
|
Printing temp. |
- |
235-255°C |
|
Heat distortion temp. |
ASTM D648 |
70°C |
|
Light transmittance (for the translucent ones) |
ASTM D1003 |
90% |
